Citizen CL-E720 Industrial Thermal Transfer Label Printer bakeng sa Warehouse
Likhatiso tsa indasteri tsa baahi li hahiloe molemong oa ho tšoarella le ho tsamaellana sebakeng sa polokelo, likepe le tikoloho ea tlhahiso.Mechini ena e kenyelletsa karolo e ncha ea Citizen ea Cross-Emulation™ le mochini oa rona oa pele oa Hi-Lift™ oa ho fihlella habonolo liribone le media.
• E fumaneha ka har'a board LAN & USB interfaces
•LinkServer™ sesebelisoa sa taolo
• Super-tlase standby tshebediso ya matla
• Bophara ba pampiri:
Bophara ba pampiri bo feto-fetohang - 0.5 inch (12.5 mm) - 4.6 inches (118.1 mm)
• Phatlalatso ea pampiri:
Moralo o tšoarellang - Mochini o netefalitsoeng oa baahi oa Hi-Lift™ all-metal
• Lebelo la Khatiso:
Ho hatisoa ka potlako haholo - ho fihla ho 200mm ka motsotsoana (8 inches ka motsotsoana)
• Tšehetso ea mecha ea litaba:
Bokhoni ba media bo boholo haholo - bo ts'oara meqolo ho fihla ho li-inch tse 8 (200 mm)
• Likhetho tsa ribone:
Mefuta e mengata ea likhetho tsa ribone - E sebelisa lithapo tse fihlang ho 360 ka hare le kantle ho maqeba
• Botenya ba pampiri:
Botenya ba pampiri ho fihla ho 0.250mm
• Pontsho:
Backlight LCD control panel bakeng sa tlhophiso e bonolo
• Hi-Open™ case bakeng sa ho buloa ho ea holimo, ha ho na keketseho ea sebaka sa maoto le ho koala ka mokhoa o sireletsehileng.
• Ha ho sa na lileibole tse sa baloeng - thekenoloji ea taolo ea ribone ea ARCP™ e netefatsa hore ho hatisoa likhatiso tse hlakileng.
• Sensor ea litaba:
Sensor ea letšoao le letšo
Sensor ea media e fetolehang
Label gap sen
| Theknoloji ea Khatiso | Phetisetso ea Thermal + Thermal Direct |
| Lebelo la ho Hatisa (boholo) | 8-inch ka motsotsoana (200 mm/s) |
| Print Width (boholo) | 4 inche (104 mm) |
| Media Width (min ho isa ho max) | 0.5 - 4.6 inch (12.5 - 118 mm) |
| Botenya ba Media (min ho isa ho max) | 63.5 ho isa ho 254µm |
| Sensor ea litaba | Lekhalo le feto-fetohang ka botlalo, lets'oao le letšo le phatsimang le ribone e haufi le pheletso |
| Bolelele ba Media (min ho isa ho max) | 0.25 ho 158 inches (6.4 ho 4013 mm, ho itšetlehile ka mohlala) |
| Boholo ba Roll (max), Boholo ba Core | Ka ntle bophara ba lisenthimithara tse 8 (200mm) Boholo ba 1 ho isa ho 3 inches (25 ho 75 mm) |
| Nyeoe | Hi-Open｢ khese ea tšepe e nang le tšobotsi e sireletsehileng, e haufi-ufi |
| Mokhoa | Hi-Lift｢ mochine oa tšepe o nang le hlooho e bulehileng ka bophara |
| Lekhotla la taolo | Likonopo tse 4, LCD e khanyang ka morao ea mebala e 2 e nang le boemo ba LED |
| Flash (Memori e sa fetoheng) | 16 MB kakaretso, 4MB e fumaneha bakeng sa mosebelisi |
| Bakhanni le software | E sa lefelloe mahala ho CD e nang le printa, ho kenyeletsoa ts'ehetso ea liforomo tse fapaneng |
| Boholo (W x D x H) le Boima ba 'mele | 250 x 458 x 261 limilimithara, 11 Kg |
| Boholo ba lente | 2.9 inch (74mm) boholo ba bophara ba kantle.bolelele ba limithara tse 360.1 inch (25mm) konokono |
| Ribbon windings & mofuta | Lehlakore la enke kahare kapa kantle, le iphumanela.Mofuta oa boka, boka ba boka / resin kapa resin |
| Sistimi ea ribone | ARCP｢ phetoho ea tsitsipano ea ribone ea othomathike |
| RAM (Memori e tloaelehileng) | 32MB kakaretso, 4 MB e fumaneha bakeng sa mosebedisi |
| Mofuta oa mecha ea litaba | Roll kapa fanfold media;li-labels, li-tag, litekete tse tsoelang pele kapa tse phunyeletsoeng.Leqeba ka hare kapa kantle |
| Motho ya sehang | Mofuta oa Guillotine, Morekisi o ka kenngoa |
| EMC le litekanyetso tsa polokeho | CE |
| TUV | |
| UL | |
| Tšebeliso ea matla | 230V: 65W (e sebetsa ho 6 IPS mosebetsing oa khatiso oa 12.5%), 2.6W (e eme) |
| Palo ea Likhao | 300,000 ho fokotsa mecha ea litaba 0.06-0.15mm;100,000 fokotsa 0.15-0.25mm |
| Qeto | 203 dpi |
| Sehokelo se ka Sehloohong | Dual Interface USB 2.0 + 10/100 Ethernet (LAN) e nang le LinkServer |
| Li-interface tsa boikhethelo | Litekanyetso tsa Wireless LAN 802.11b le 802.11g, limithara tse 100, 64/128 bit WEP, WPA, ho fihla ho 54Mbps |