6 Inch Citizen CL-S6621/CL6621XL Desktop Thermal Transfer Labels Printer
Printer ea rona e ikhethang ea 6-inch CL‑S6621 e beha maemo a macha bakeng sa mechini ea komporo.E nyane ebile e sebetsa hantle ho feta khatiso efe kapa efe e ka bapisoang, CL‑S6621 e fana ka Cross-Emulation ea othomathike, bakeng sa ho hokahana habonolo le ho lumellana, 'me e fana ka Hi‑Lift™ Mechanism ea rona e tsoetseng pele.CL-S6621 e fana ka khatiso e nepahetseng ka ho kenya mecha ea litaba ka potlako le ho e sebelisa habonolo, e etsa hore e be tharollo e phethahetseng bakeng sa khatiso e thata, e tšepahalang le e phahameng.
•Mokotla o thata oa polasetiki
•Lihlooho tsa khatiso tsa tšepe kaofela
•Lebelo le phahameng
Phatlalatso ea pampiri:
• Moralo o tšoarellang - Mochini o netefalitsoeng oa baahi oa Hi-Lift™ all-metal
Lebelo la Khatiso:
• Hatisa ka potlako - 6 inches ka motsotsoana (150 mm ka motsotsoana)
• Tšehetso ea mecha ea litaba: Bokhoni ba litaba bo boholo - bo tšoara li-roll ho fihla ho 4.9 inches (125 mm)
• Likhetho tsa ribone: Mefuta e mengata e fapaneng ea likhetho tsa ribone - E sebelisa lithapo tsa maqeba tse fihlang ho 360 ka hare le kantle.
• Hi-Open™ case bakeng sa ho buloa ho ea holimo, ha ho na keketseho ea sebaka sa maoto le ho koala ka mokhoa o sireletsehileng.
Tlhokahalo ea sebaka se tlase:
• phepelo e kopanetsoeng ea motlakase e etsa hore sebaka sa mosebetsi se hloekile
Matla:
• Phepelo ea matla a ka hare bakeng sa ho tšepahala
Sensor ea litaba:
• Fetola media sensor
Tear bar:
• Tear-bar e tloaelehileng bakeng sa li-tag tse nang le perforated
| Theknoloji ea Khatiso | Phetisetso ea Thermal + Thermal Direct |
| Lebelo la ho Hatisa (boholo) | 6 lisenthimithara ka motsotsoana (150 mm/s) |
| Print Width (boholo) | 6 inche (168 mm) |
| Media Width (min ho isa ho max) | 2 ho isa ho 7 inches (50 ho 178 mm) |
| Botenya ba Media (min ho isa ho max) | 63.5 ho isa ho 254 µm |
| Sensor ea litaba | Lekhalo le feto-fetohang ka botlalo, notch, letšoao le letšo le khanyang le mecha ea litaba e tlase |
| Bolelele ba Media (min ho isa ho max) | 0.25 ho isa ho 32 inches (6.35 ho 812.8 mm) |
| Boholo ba Roll (max), Boholo ba Core | Ka hare ho bophara ba lisenthimithara tse 5 (125 limilimithara) Boholo ba 1 ho isa ho 3 inches (25.4 ho 76 mm) |
| Nyeoe | Hi-Open™ industrial ABS case e nang le sebaka se sireletsehileng |
| Mokhoa | Hi-Lift™ mochini oa tšepe o nang le hlooho e bulehileng haholo |
| Lekhotla la taolo | Likonopo tse 4 le li-LED tse 4 |
| Flash (Memori e sa fetoheng) | 8 MB kakaretso, 1 MB e fumaneha bakeng sa mosebelisi |
| Bakhanni le software | E sa lefelloe mahala ho CD e nang le printa, ho kenyeletsoa ts'ehetso ea liforomo tse fapaneng |
| Boholo (W x D x H) le Boima ba 'mele | 303 x 290 x 273 limilimithara, 7,9 Kgs |
| Tiisetso | Lilemo tse 2 ho printa.Likhoeli tse 6 kapa 50 Kms printhead |
| Emulations (Lipuo) | Cross-Emulation™ – switjha e iketsang dipakeng tsa emulations tsa Zebra® le Datamax® |
| Zebra® ZPL2® | |
| Mofetoleli oa CBI™ BASIC | |
| Datamax® DMX | |
| Boholo ba lente | 2.9 inch (74mm) boholo ba bophara ba kantle.bolelele ba limithara tse 360.1 inch (25mm) konokono |
| Ribbon windings & mofuta | Lehlakore la enke ho kena kapa ho tsoa, switjha e ka khethoang.Mofuta oa boka, boka ba boka / resin kapa resin |
| Sistimi ea ribone | ARCP™ tokiso ea tsitsipano ea ribone ea othomathike |
| RAM (Memori e tloaelehileng) | 32 MB kakaretso, 1 MB e fumaneha bakeng sa mosebedisi |
| Motho ya sehang | Mofuta oa Guillotine, Morekisi o ka kenngoa |
| Qeto | 203 dpi |
| Sehokelo se ka Sehloohong | Dual Interface Serial (RS-232C), USB (mofuta oa 2.0, lebelo le felletseng) |
| Li-interface tsa boikhethelo | Litekanyetso tsa Wireless LAN 802.11b le 802.11g, limithara tse 100, 64/128 bit WEP, WPA, ho fihla ho 54Mbps |
| Ethernet (10/100 BaseT) | |
| Parallel (IEEE 1284 e lumellana) | |
| Theknoloji ea Khatiso | Phetisetso ea Thermal + Thermal Direct |